PSS 3 1/2in shaft / 4 3/4in t One Design 080506 has a usable length

080506 has a usable length of 6-5/16" although only 3-1/4" of the shaft is threaded

Increased water flow without increased amperage draw

Motor Thermal cut-out

the cured resin/hardener mixture yields a rigid

Connections: - outlet connection for 13mm (½”) bore hose

PSS 3 1/2in shaft / 4 3/4in t One Design 080506 has a usable lengthAs with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. PYI suggests preventative maintenance. The PSS bellow should be replaced in six year intervals. During bellows replacement it is recommended the o rings & set screws in the stainless steel rotor also be replaced. Bellows may need to be more frequently inspected in an environment where non sealed batteries